Milesight network camera Bedienungsanleitung PDF herunterladen (Seite 18)

User Manual

Enable

Enable or disable the schedule.

Date from/Date to

Begin or stop to put in the schedule.

Record Type

Including alarm or continuous

Trigger

Motion Detection from the ‘Milesight VMS Client’ or IPC itself.

Capture Image

Pre record

Capture how many pictures per second when alarm is triggered.

Setting the length of the pre-alarm recording file.Setting range:0-9s.

Post record

Setting length of the post-alarm recording file.Setting range:1-1800s.

SMTP

Enable to use the SMTP.

Step3: Choose a type under the ’Record Type’.

Note: If you choose the ‘Alarm’ type as the record type, you can also do some settings including

trigger condition, action when alarm is triggered.

Figure 3.19

If you choose the ‘Alarm’ type as the record type,the timeline is red.if you choose the ‘Record’

type as the recore type,the timeline is blue.

Figure 3.20

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 37 38

Keine Kommentare

Milesight network camera Bedienungsanleitung Seite 18